New Articles

  1. What type/size of screws should be used when wall mounting the 99036 6 outlet surge protector?

    All Fellowes Surge Protectors that have screw slots on the back can use #8 self tapping screws. The most common are pan head or flat head depending on the opening on the Surge Protector. Pan Head are good for the surges with smaller openings. Flat...
  2. What is Microban®?

    "Microban technology is built-in antimicrobial protection that gives products an added level of protection against microbes such as stain and odor causing bacteria, mold and mildew. Microban protection helps products stay cleaner, fresher, and las...
  3. What does the red flashing light indicate on my Climate Control Footrest?

    When the red light is flashing, it could indicate one of two things: 1. The product is equipped with an eight hour shut-off feature and once it has reached eight hours, the fan stops and the red light flashes.  Switch the product to "off" and wait ...
  4. How do I clean the PrivaScreen™ Blackout Privacy Filter?

    For PrivaScreen™ Filters on laptops, monitors and tablets: We recommend removing the filter from the screen and using the included cleaning cloth. If smudges or other contaminates are resistant to this method, again remove the filter from the screen...
  5. How many pounds of paper do the most popular box sizes hold?

    24" letter size - holds the contents of one letter size file drawer or approximately 50 lbs. of paper. 24" legal size - holds the contents of one legal size file drawer or approximately 65 lbs. of paper. Letter/Legal boxes will hold approximately 35...
  6. What is the proper way to insert a laminating pouch into the laminator?

    Always put items in the appropriate size pouch. Place the item in the pouch centered and completely touching the sealed edge. Insert pouch into laminator sealed edge first. Keep the pouch straight upon entry.
  7. How do you clean laminator rollers?

    For best laminating results and to minimize / remove glue from the rollers, we recommend that a single cleaning sheet is used at the end of every laminating session before the laminator gets turned off. Note - Sheets can be used several times befor...
  8. Can the Heat and Slide Footrest get wet (i.e. if my shoes were wet from snow)?

    Water, melting snow, or other liquids would give off vapor as the liquid evaporated.  Once all the liquid evaporates, any odor or vapor would cease.  The electronics are shielded from any liquids.  The unit can not be submerged.
  9. What causes bubbles on the laminating surface?

    Sometimes paper has dust or specks on it which minimizes the effectiveness of the adhesive. Make sure the surface space is clean before laminating. Heavily printed sheets, especially those with large dark areas, are at times difficult to laminate wi...
  10. Can I get additional columns/feet to increase the height of my 91712 Standard Monitor Riser?

    Unfortunately, no. Fellowes has tested the maximum height and weight distribution to ensure the safety of persons and equipment using this product. Additional risers are not recommended, as injury or equipment damage could result. We strongly disc...