-
Cleaning is easy for Fellowes mouse pads. Simply wipe the surface with a damp cloth to clean any soiled or dirt on the mouse pad. We do not recommend immersing the mouse pad in water.
-
Created On: 04/15/2019
in Binding The binding cover may be to thick to bind or it may be too small for the document The temperature setting may be incorrect. The documents were left on the heating plate too long. Please bind the documents again and make sure the sheets are in c...
-
Created On: 04/18/2019
in Sit-Stand Solutions Yes, there is assembly required which should take anywhere from 90 seconds to 10 minutes depending on the table top attachment method you choose. The Levado base features fold out legs that allow you to lock into place with the patent pending Swift...
-
Created On: 04/18/2019
in Sit-Stand Solutions Press and hold up and down at same time for 10 seconds.
-
Created On: 04/18/2019
in Sit-Stand Solutions The Levado base is quiet in operation and has a decibel rating range of 46-48.
-
Created On: 04/18/2019
in Sit-Stand Solutions It can hold up to 200lbs including the weight of the table top.
-
Created On: 04/18/2019
in Sit-Stand Solutions The height adjusts at 1.4" per second. There will not be any noticeable difference in speed with additional weight applied.
-
Created On: 04/18/2019
in Sit-Stand Solutions Please submit your inquiry by clicking on the Ask a Question button above or call Fellowes Customer Service and we will be glad to assist you: 1.800.955.0959 or 1.800.945.4545, M-F, 7am-7pm CST.
-
Created On: 04/18/2019
in Sit-Stand Solutions Make sure your table top is face down on a soft, clean surface and place base on table. Use the 5mm Allen key to loosen the (8) set screws on the inward side of the cross channels. Expand or contract accordingly until the ends are flush with the tab...
-
Created On: 04/18/2019
in Sit-Stand Solutions This will depend on your setup. If any of your cables are routing to the floor be sure that they can accommodate the full range of motion up to 48.5”. Refer to Accessory Installation Step 1 in the instruction manual: ...