Popular Articles

  1. How long should the power cables be for items placed on Lotus Sit Stand (0007901, 0009901) or Lotus VE (8080101, 8082001)

    Most cable lengths are an average of 6.5ft, which should be sufficient for working when standing; however, it would be important to consider where the power sockets are located.  The Lotus Sit Stand 0007901/0009901 raises 17" and the VE Sit Stand 80...
  2. Are Fellowes surge protectors UL approved?

    Yes, all Fellowes surge protectors are UL approved.
  3. What do I do if I need more adhesive strips or tabs for my PrivaScreen™ Blackout Privacy Filter?

    A replacement set can be sent via Fellowes Customer Service for replacement adhesive strips or tabs. 1-800-945-4545, Monday through Friday 7:00 AM to 7:00 PM CST
  4. What Bankers Box SmoothMove box styles have handles?

    Both the Bankers Box SmoothMove Prime and Classic style of boxes have handles for comfortable moving and lifting.
  5. I am concerned the Lotus might damage my desk.

    The Lotus Sit/Stand Workstation  Lotus DX  both feature rubber feet that help protect the surface of the desk. The Lotus VE and Lotus RT:  The clamp and platform have rubber/foam pads that help protect the surface of the desk.
  6. What size monitor can the Lotus VE Sit Stand Workstation hold?

    Lotus VE Sit Stand Workstations 8080101 and 8082001: The only restriction the single monitor version has is the 20lbs weight limit. The Dual version can accommodate up to 25” diagonal screens with combined weight of 20lbs. ...
  7. Can I charge multiple devices at once on the DX Lotus Sit Stand wireless charger?

    No, however you can still utilize the USB ports to charge additional devices. The front two USB ports will provide the quickest charge.
  8. If my device is charging wirelessly can you still use the USB ports on my DX Lotus Sit Stand?

    Yes, if your device is charging wirelessly you can still utilize the USB ports to charge additional devices.
  9. My table top is smaller or larger than 60”. How do I change the width of my Levado base to fit?

    Make sure your table top is face down on a soft, clean surface and place base on table. Use the 5mm Allen key to loosen the (8) set screws on the inward side of the cross channels. Expand or contract accordingly until the ends are flush with the tab...
  10. My desk is < 3” thick and the clamp for my RT Lotus Sit Stand won’t fit, what am I doing wrong?

    You will need to flip the base clamp by removing the two bolts and reinstalling. Refer to step 1A in the instruction manual. ...