Popular Articles

  1. What size monitor does the Lotus RT Sit Stand Workstation hold?

    Lotus RT Sit Stand Workstations 8081501, 8081601, 8081701, 8081801:  You can choose between either a single or dual version of the Lotus RT. The single monitor arm holds a monitor up to 27” and 17 lbs. and the dual monitor arm holds a monitor up to...
  2. How do I attach the PrivaScreen™ Blackout Privacy Filter to my smartphone?

    To install a PrivaScreen™ Blackout Filter to your smartphone, it is important to first clean the surface of your device with the included cleaning cloth to ensure all fingerprints, grease and debris are wiped away. Next, remove the clear protective ...
  3. I did not line up the velcro properly on my Lotus sit stand and now it’s not usable. Can I have more sent to me?

    These are meant for single use as specified in the manual. We have spare parts for purchase that we can supply. You could also go to your local hardware store and purchase adhesive discs (3.5mm).
  4. Do Fellowes' surge protectors cover lightning strikes?

    Fellowes surge protectors will prevent damage from distant lightning strikes. No brand of surge protection can realistically offer protection from nearby strikes due to the massive amounts of electricity generated in even a small lightning strike. H...
  5. What would happen if something fell through the holes on top of my 8030901 Climate Control Footrest and got inside of the product?

    Dust or crumbs should not cause smoke and definitely not fire.  The heater is low wattage and will not get remarkably hot.  The fan will also blow dust back out that has fallen into the product.  Normal heaters that are in the market are in the 1500...
  6. How many pounds can each compartment hold?

    Each compartment can hold up to 5 lbs or one ream of paper (about 500 sheets)
  7. How much power does the Lotus DX Sit Stand take (voltage)?

  8. Can I leave my phone on the DX Lotus Sit Stand charger forever or do I need to remove?

    Yes, it will limit the power once fully charged.
  9. How do I fit my current table top onto the Levado base?

    You can use the VersaTop Clamps™ to install your current table top onto the Levado base. Ensure that the table top is 48”-72” wide x 24”-30” deep. Refer to install option 1 in the instruction manual. ...
  10. How long should the power cables be for items placed on Lotus Sit Stand (0007901, 0009901) or Lotus VE (8080101, 8082001)

    Most cable lengths are an average of 6.5ft, which should be sufficient for working when standing; however, it would be important to consider where the power sockets are located.  The Lotus Sit Stand 0007901/0009901 raises 17" and the VE Sit Stand 80...